Construction
R&S
®
TS-PSM4
13
User Manual 1178.2796.02 ─ 01
Figure 4-7: R&S TS-PRIO2 position of 3 A fuses
4.2.2 Connectors
Table 4-3: Connectors on the R&S TS-PRIO2
Abbreviation
Use
X11
Interface of channels 9 to 20 with the R&S TS-
PSM4.
X1, X2
Interface of low power channels 1 to 8 with the load
or voltage source.
X3, X4, X5
Interface of high power channels 9 to 20 with the
load or voltage source.
X20
Interface of channels 1 to 8 with the R&S TS-PSM4.
4.3 R&S TS-PK04
If the optional R&S TS-PK04 cable set has been installed in the R&S TS-PCA3 or R&S
TS-PWA3 chassis, the 16 A high current channels 9 to 20 and all 2 A channels of the
R&S TS-PSM4 on the rear of the chassis will be made accessible via the connectors
X3 and X4. For this purpose the R&S TS-PSM4 module must be installed in slot 16 in
the chassis.
R&S TS-PK04
