Rohde & Schwarz SR8000 Series, System Manual

Page: 121 / 199

Chapter 5 Operation
5300.9677.71 - 5.34 - EN-4
2.5.5.2 Setup > SNMP > Manager Menu Window
The Manager menu window allows you to configure access protection for communities.
Function Description
Port SET/GET UDP port for SNMP SET/GET
Default setting: 161
Inhibit Status Switch for message suppression in Local mode
– Off: Traps (alarm messages) are sent in both operating modes
(Remote and Local)
– On: No traps are sent in Local mode but the alarms are stored; excep-
tion: trap for Local Mode
Default setting: Off
If OIDs are polled with message suppression active, the return value is 0
(undefined). In this operating state, SNMP commands (SET) are not
executed but simply confirmed.
When the Remote mode is reactivated, all stored alarms are sent once.
The polling of OIDs again returns current values.
Max. not transmitted Number of alarms to be stored if message suppression is active
Default setting: 255
Function Description
Access Level [1 … 5] Used to select access authorization for one of five user groups
– Read Only: For GET (only read access to the agent)
– Read / Write: For SET (read and write access to the agent)