Rohde & Schwarz SMM100A, User Manual

Page: 509 / 1088

File and data management
R&S
®
SMM100A
509 User Manual 1179.1341.02 ─ 05
If the connection does not succeed, consider to check the following:
●
Is the network folder or computer you try to map turned on?
●
Is the network folder or computer enabled for remote access?
●
Does the selected user name have the necessary permissions?
See also Chapter 10.9.5, "Using a file server for test files exchange" , on page 514.
10.9 How to transfer files from and to the instrument
As explained in "File handling" on page 485, you access the file system of the
R&S SMM100A via one of the following ways:
●
Via the built-in "File Manager"
See
Chapter 10.8, "Using the file manager" , on page 503.
●
On an instrument connected to a LAN:
–
Via one of the standard functions FTP or SMB (samba)
See
Chapter 10.9.2, "Accessing the file system of the R&S SMM100A via
FTP" , on page 511 and
Chapter 10.9.3, "Accessing the R&S SMM100A file system via SMB (Samba)" ,
on page 512
– Via mapped network drives
See
Chapter 10.8.4, "How to map a network folder" , on page 507.
●
Via a connected USB storage device
See
Chapter 10.9.4, "Using a USB storage device for file transfer" , on page 514
Mainly because of security reasons, the access to the file system of your
R&S
SMM100A can be denied, because one or all these access methods are deliber-
ately disabled. Access to the file system via LAN and/or USB requires that the corre-
sponding service is enabled and a write access to the file system is enabled. Refer to
How to transfer files from and to the instrument