Rohde & Schwarz SMBV-P101, User Manual

Page: 44 / 131

GNSS Production Configuration and Settings
R&S
®
SMBV-P101
29 User Manual 1176.9787.02 ─ 05
Satellite State ← Constellation Table
Activates/deactivates the satellite.
Remote command:
[:SOURce<hw>]:BB:GNPR:SATellite<st>:STATe
on page 75
Standard ← Constellation Table
Indicates the navigation standard the corresponding satellite belongs to.
Remote command:
[:SOURce<hw>]:BB:GNPR:SATellite<st>:STANdard?
on page 75
Signals ← Constellation Table
Selects the type of signal the corresponding satellite is using.
Table 4-2: Overview of the supported signals
Band Entry Point Standard Signal
L1/E1 GPS GPS C/A
Galileo Galileo E1-DEF
GLONASS GLONASS R-C/A
BeiDou BeiDou B-C/A
Remote command:
[:SOURce<hw>]:BB:GNPR:SATellite<st>:SIGNal?
on page 75
SV-ID/PRN ← Constellation Table
Enters the Space Vehicle ID (SV-ID) or Pseudo-Random Noise (PRN) of the satellite to
be simulated. This value is used to generate the corresponding spreading code.
Note: The SV IDs of the GLONASS satellites are with 64 smaller than their PRN num-
ber, e.g to GLONASS satellite R5 corresponds PRN=69.
If "Real Navigation Data" is used, you can select healthy satellites from the almanac
records; otherwise, any ID can be selected.
Remote command:
[:SOURce<hw>]:BB:GNPR:SATellite<st>:SVID
on page 71
Power ← Constellation Table
Power offset of a satellite.
Remote command:
[:SOURce<hw>]:BB:GNPR:SATellite<st>:POWer
on page 74
4.4.3 Individual Satellite Settings
Comprises the settings of the selected satellite.
Satellite Configuration Settings