GNSS Production Configuration and Settings
R&S
®
SMBV-P101
37
User Manual 1176.9787.02 ─ 05
4.5 Navigation Message Configuration
To access these settings:
1. Select "Baseband block > Satellite Navigation > GNSS Production...".
2. Select "GNSS Production > Navigation Data > Data Source > Real Navigation
Data"
3. Select "Satellite Configuration > Satellite Table > e.g. Sat 1 > GPS" and select
"Navigation... ".
Although the navigation messages are fully configurable, it is recommended to use
the almanac's parameter as basis for further configurations.
4. Select
For better readability of the parameters in the "Navigation Message Configurations"
dialog, the corresponding values are input as integer in the same way as they are
included in the satellite's navigation message, but the scaled values and the scal-
ing factors are also displayed. Different scaling factors may apply for the same
parameters in the different GNSS standards.
Navigation Message Configuration
