2-13
VENICE 2U | Hardware Guide | Version 1.2
Rohde & Schwarz DVS GmbH
Overview
Overview of the Rear
2.3 Overview of the Rear
This section describes the rear of the system. After a general overview
of the rear of all VENICE 2U hardware variants, some explanatory de-
tails about the digital video in- and outputs are given. Next, the main
connector panel will be described, followed by detailed descriptions of
the power supply, the ATX connector panel and the slot panel connec-
tors.
2.3.1 The Rear of the System
This section provides an overview of the rear of the system:
Figure 2-9: Overview of the rear of the VENICE 2U with full featureset
The full complement of four video channels and/or HDMI outputs are
optionally available. In its standard variant VENICE 2U will be delivered
with two video channels and empty connector panels are covered by
blind panels.
main connector panel The main connector panel provides most of
the standard in- and outputs of VENICE 2U to
give you the full functionality of the system. It
holds, for example, the connectors for remote
control and video I/Os. It is in more detail de-
scribed in section “Main Connector Panel” on
page 2-16.
power supply
The redundant power supply provides the sys-
tem with power. It consists of two indepen-
dent power supply units: Even if one fails the
other will still supply enough power to keep
the system operational. Further information
about the power supply can be found in sec-
tion “Power Supply” on page 2-19.
main connector panel
slot panel connectors
ATX connector panel
power supply
