Rohde & Schwarz R&S ATS1000, Instruction Handbook Manual

Page: 75 / 81

Disabling and Scrapping
R&S
®
ATS1000
75 Instructions Handbook 1179.2983.02 ─ 01
10 Disabling and Scrapping
Every user except the operator is allowed to perform the activities described in this
chapter.
Familiarize yourself with residual risks and potentially dangerous situations.
See Chapter 2.2, "Residual Risks" , on page 11 and Chapter 2.3, "Potentially Danger-
ous Situations" , on page 13.
● Taking Out of Commission ...................................................................................... 75
● Disposal .................................................................................................................. 76
10.1 Taking Out of Commission
To secure the door
1. If a DUT or any of your equipment is still in the chamber, take it out.
2. Close the chamber door.
To label the chamber as out of commission
► If you take a defective chamber out of commission, make sure that nobody can use
the chamber.
Take the steps stipulated at your company for defective equipment.
To disconnect from power and control
1. Disconnect the chamber from mains power.
The chamber is deactivated.
2. Disconnect the power cable from the chamber.
3. Store the power cable for later use.
4. Disconnect all control connections from the chamber.
5. Protect exposed fiber-optic (FO) connectors of cables using the dust caps provi-
ded.
Cover all unused FO connectors:
● On the chamber's lower rear panel
● On the NCD controller
● On the cables
Taking Out of Commission