manualshive.com logo in svg

Rohde & Schwarz OSP-B200S2, User Manual

Share
Download
Rohde & Schwarz OSP-B200S2 User Manual Download Page 295

RC Commands

R&S

®

OSP

295

User Manual 1178.7100.02 ─ 05

All path filenames have the extension "

.path

". Do not enter the extension when speci-

fying a filename. A filename query does not return the extension.

For example, when you save the path file "

gen-pa_1

", it is saved as

"

gen-pa_1.path

". A query returns this filename as "

gen-pa_1

", only.

Setting parameters: 

<dummy>

This parameter is required but not evaluated. It can have any
integer numerical value (no decimal places).

<filename>

String parameter to specify the name of the file to be stored.

Usage: 

Event

Manual operation: 

See 

"Export Paths"

 

on page 190

ROUTe:MODule:CATalog?

Provides compatibility of remote control commands with legacy switch units
R&S

 

OSP120/130/150.

Returns a list of all hardware-detected modules installed in all legacy switch units in an
interconnection setup.

Example: 

ROUT:MOD:CAT?

Return string: 

"OSP-B101|F01M01","OSP-B123|F01M02",

"OSP-B123|F01M03"

The response contains the module type (e.g. R&S

 

OSP-B101)

and the internal module name (e.g. 

F01M01

).

In the comma-separated string, each module's information is in
quotation marks.
If you enable the 

compatibility mode

, the module index is

returned as "A11" rather than "M01". Also, a hyphen is used
instead of the vertical line character. Hence, an example for a
segment in the return string is 

"OSP-B101-F01A01"

.

If no installed module is detected, the following SCPI error is
generated (which you can query by 

SYST:ERR?

):

-200,"Execution error;ROUTe:MODule:CATalog?"

Usage: 

Query only

READ:IO:IN4?
READ:IO:IN5?
READ:IO:IN16?

Provides compatibility of remote control commands with legacy switch units
R&S

 

OSP120/130/150.

Like 

READ:IO:IN?

, these commands query the states of all 4, 5 or 16 input channels

of a selected I/O module.

Usage: 

Query only

Legacy System Commands from R&S

 

OSP1x0

Summary of Contents for OSP-B200S2








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands