R&S MDS-21
Introduction
User Manual 1142.8407.04 - 02
E-7
2.1.1 EUT Side
This side faces the EUT.
2.1.2 Clamp Reference Point (CRP)
The clamp reference point defines the position of the current transformer and is used
as a reference for determining the location (distance) of the local maximum emission.
2.1.3 Spacer
The spacer is used to center test cables with a small diameter, e.g. for calibration. The
maximum cable diameter with spacer is 6 mm.
2.1.4 Measuring Receiver Output
N 50
, female output for connecting the measuring receiver.
2.1.5 Towing Ring
The towing ring is used to connect the pull cord for manual operation of the absorbing
clamp.
