Rohde & Schwarz FSW13, User Manual

Page: 728 / 1150

Remote Commands
R&S
®
FSW
728 User Manual 1173.9411.02 ─ 19
Useful commands for occupied bandwidth measurements described elsewhere
Configuring the channel:
●
[SENSe:
​
]POWer:
​
ACHannel:
​
BANDwidth|BWIDth[:
​
CHANnel<ch>]
​
●
[SENSe:
​
]POWer:
​
ACHannel:
​
PRESet
​
●
[SENSe:
​
]POWer:
​
ACHannel:
​
PRESet:
​
RLEVel
​
Defining search limits:
●
CALCulate:
​
MARKer:
​
X:
​
SLIMits[:
​
STATe]
​
on page 935
●
CALCulate:
​
MARKer:
​
X:
​
SLIMits:
​
LEFT
​
on page 935
●
CALCulate:
​
MARKer:
​
X:
​
SLIMits:
​
RIGHT
​
on page 935
Performing the measurement:
●
CALCulate<n>:
​
MARKer<m>:
​
FUNCtion:
​
POWer:
​
SELect
​
on page 698
●
CALCulate<n>:
​
MARKer<m>:
​
FUNCtion:
​
POWer[:
​
STATe]
​
on page 698
Retrieving results:
●
CALCulate:
​
MARKer:
​
FUNCtion:
​
POWer<sb>:
​
RESult?
​
on page 696
●
CALCulate<n>:
​
MARKer<m>:
​
FUNCtion:
​
POWer:
​
SELect
​
on page 698
●
CALCulate<n>:
​
MARKer<m>:
​
FUNCtion:
​
POWer[:
​
STATe]
​
on page 698
Remote commands exclusive to occupied bandwidth measurements
[SENSe:]POWer:BANDwidth|BWIDth
...............................................................................728
[SENSe:]POWer:BANDwidth|BWIDth <Percentage>
This command selects the percentage of the total power that defines the occupied
bandwidth.
Parameters:
<Percentage> Range: 10 PCT to 99.9 PCT
*RST: 99 PCT
Example: POW:BWID 95PCT
Manual operation: See "% Power Bandwidth" on page 191
11.5.5.2 Programming Example: OBW Measurement
This programming example demonstrates the measurement example described in
chapter 5.5.5, "Measurement Example" , on page 193 in a remote environment.
//-------------Configuring the Measurement-----------------------
*RST
//Resets the instrument
FREQ:CENT 800MHz
//Sets the center frequency to 800 MHz.
DISP:TRAC:Y:RLEV -10dBm
//Sets the reference level to -10 dBm.
Configuring and Performing Measurements