Select the Preset state
FSMR
1166.3311.12-01 1.2
E-1
Select the Preset state
All of the following examples assume the standard settings for the measuring receiver. These are set
with the
PRESET
key. The
PRESET
must be set to Factory default values and measuring Receiver
Mode.
Check the
PRESET
setting with the following steps:
SETUP
NEXT
PRESET
RECEIVER
1. Define Preset instrument mode
Press the SETUP key.
The setup menu is opened.
Press the menu change key
NEXT
.
The submenu is opened.
Press the PRESET RECEIVER softkey.
The following presets will force the instrument into the Measuring
Receiver mode.
FILE
STARTUP
RECALL
2. Define the Startup Recall
Press the FILE key.
The file menu is displayed.
In the FILE menu press the STARTUP RECALL softkey.
A table with available instrument recall states is displayed.
In the STARTUP table, highlight the entry named “FACTORY”
and enable it with the Enter key as STARTUP RECALL.
PRESET
3. Reset the instrument.
Press the PRESET key.
The main receiver menu is opened.The receiver mode is set.
