Rohde & Schwarz FPC Series, User Manual

Page: 376 / 419

Function Reference
R&S
®
FPC
373 User Manual 1178.4130.02 ─ 07
Select Trace
See "Selecting a trace" on page 114 and "Selecting a second trace" on page 114.
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>[:STATe]
on page 268
Trace Mode
See "Selecting the trace mode" on page 116.
Remote command:
Trace mode:
DISPlay<n>[:WINDow]:TRACe<t>:MODE
on page 267
# of averages:
[SENSe:]SWEep:COUNt
on page 270
Detector
See "Selecting the detector" on page 117.
Remote command:
Detector:
[SENSe:]DETector<t>[:FUNCtion]
on page 269
Auto detector:
[SENSe:]DETector<t>[:FUNCtion]:AUTO
on page 270
Memory Traces
See "Working with memory traces" on page 117.
Remote command:
Copy trace:
CALCulate<n>:MATH<t>:COPY:MEMory
on page 266
Memory trace state:
DISPlay<n>[:WINDow]:TRACe<t>:MEMory[:STATe]
on page 267
Trace Math
See "Using trace mathematics" on page 118.
Remote command:
State:
CALCulate<n>:MATH<t>:STATe
on page 267
Operation:
CALCulate<n>:MATH<t>[:EXPRession][:DEFine]
on page 266
20.4.17 Lines Menu
Access : [Lines]
Display Line .................................................................................................................373
Show Limit Lines ......................................................................................................... 374
Upper Limit ..................................................................................................................374
Lower Limit ..................................................................................................................374
Audio Beep ..................................................................................................................374
Display Line
See "Using a display line" on page 129.
Remote command:
State:
CALCulate<n>:DLINe:STATe
on page 288
Position:
CALCulate<n>:DLINe
on page 288
Function Reference: Spectrum Application