Rohde & Schwarz FPC Series, User Manual

Page: 377 / 419

Function Reference
R&S
®
FPC
374 User Manual 1178.4130.02 ─ 07
Show Limit Lines
See "Hiding a limit line" on page 132.
Remote command:
CALCulate<n>:LIMit<k>:STATe
on page 293
Upper Limit
See "Selecting a limit line" on page 131, "Using a threshold line" on page 131 and
"Removing limit lines" on page 132.
Remote command:
Threshold line:
CALCulate<n>:LIMit<k>:UPPer:THReshold
on page 295
Custom line:
CALCulate<n>:LIMit<k>:UPPer:SELect
on page 294
Removal:
CALCulate<n>:LIMit<k>:DELete
on page 291
Limit check:
CALCulate<n>:LIMit<k>:FAIL?
on page 291
Lower Limit
See "Selecting a limit line" on page 131, "Using a threshold line" on page 131 and
"Removing limit lines" on page 132.
Remote command:
Threshold line:
CALCulate<n>:LIMit<k>:LOWer:THReshold
on page 292
Custom line:
CALCulate<n>:LIMit<k>:LOWer:SELect
on page 292
Removal:
CALCulate<n>:LIMit<k>:DELete
on page 291
Limit check:
CALCulate<n>:LIMit<k>:FAIL?
on page 291
Audio Beep
See "Performing limit checks" on page 132.
Remote command:
CALCulate<n>:LIMit<k>:BEEP[:STATe]
on page 289
20.4.18 Marker Menu
Access : [Mkr]
Marker <x> .................................................................................................................. 374
Marker Type ................................................................................................................ 375
Marker Mode ............................................................................................................... 375
Marker Demodulation ..................................................................................................375
All Markers On ............................................................................................................ 375
Marker Display ............................................................................................................ 375
All Markers Off .............................................................................................................376
Marker <x>
See "Positioning a marker" on page 121 and "Adding additional markers" on page 121.
Remote command:
Marker state:
CALCulate<n>:MARKer<m>[:STATe]
on page 278
Marker position (x-axis):
CALCulate<n>:MARKer<m>:X
on page 279
Marker position (y-axis):
CALCulate<n>:MARKer<m>:Y?
on page 281
Delta marker state:
CALCulate<n>:DELTamarker<m>[:STATe]
on page 273
Function Reference: Spectrum Application