Rohde & Schwarz FPC Series, User Manual

Page: 378 / 419

Function Reference
R&S
®
FPC
375 User Manual 1178.4130.02 ─ 07
Delta marker position (x-axis):
CALCulate<n>:DELTamarker<m>:X
on page 273
Delta marker position (relative):
CALCulate<n>:DELTamarker<m>:X:RELative
on page 274
Delta marker position (y-axis):
CALCulate<n>:DELTamarker<m>:Y?
on page 275
Marker Type
See "Selecting the marker type" on page 122.
Remote command:
With corresponding syntax
MARKer
or
DELTamarker
Marker Mode
See Chapter 14.10, "Marker Functions" , on page 125.
Remote command:
Noise:
CALCulate<n>:MARKer<m>:FUNCtion:NOISe[:STATe]
on page 287
Noise result:
CALCulate<n>:MARKer<m>:FUNCtion:NOISe:RESult?
on page 286
Frequency count:
CALCulate<n>:MARKer<m>:COUNt[:STATe]
on page 282
Frequency count:
CALCulate<n>:MARKer<m>:COUNt:FREQuency?
on page 282
n dB down:
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:STATe
on page 286
n dB:
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown
on page 284
n dB down frequency:
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:
FREQuency?
on page 285
n dB down result:
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult?
on page 285
Marker Demodulation
See Chapter 14.10.4, "Marker Demodulation" , on page 128.
Remote command:
State:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation[:STATe]
on page 284
Modulation:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:SELect
on page 283
Demodulation time:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:HOLD
on page 283
Volume:
SYSTem:AUDio:VOLume
on page 287
All Markers On
See "Adding additional markers" on page 121.
Remote command:
not supported
Marker Display
See "Selecting the marker display type" on page 122.
Remote command:
CALCulate<n>:MARKer<m>:FREQuency:MODE
on page 276
Function Reference: Spectrum Application