Remote Control
R&S
®
ESRP
628
User Manual 1175.7445.02 ─ 08
CALCulate<n>:DELTamarker<m>:SGRam:Y:MAXimum[:PEAK]
..........................................631
CALCulate<n>:DELTamarker<m>:SGRam:Y:MINimum:ABOVe
.......................................... 632
CALCulate<n>:DELTamarker<m>:SGRam:Y:MINimum:BELow
...........................................632
CALCulate<n>:DELTamarker<m>:SGRam:Y:MINimum:NEXT
............................................ 632
CALCulate<n>:DELTamarker<m>:SGRam:Y:MINimum[:PEAK]
...........................................633
CALCulate<n>:DELTamarker<m>:SGRam:FRAMe
<Frame> | <Time>
This command positions the delta marker on a particular frame. The frame is relative to
the position of marker 1.
The command is available for the spectrogram.
Suffix:
<n>
.
1...4
Selects the measurement window.
<m>
1...16
Selects the marker.
Parameters:
<Frame> | <Time>
<Frame> (if time stamp is off)
Defines the distance of the deltamarker in frames and in relation
to the position of marker 1.
Note that in receiver mode, it is not possible to select a frame,
only a time.
<time> (if time stamp is on)
Defines the distance of the deltamarker in seconds and in rela-
tion to the position of marker 1. The reference is the time stamp
of marker 1.
Example:
CALC:DELT4:SGR:FRAM -20
Sets fourth deltamarker 20 frames below marker 1.
CALC:DELT4:SGR:FRAM 2 s
Sets fourth deltamarker 2 seconds above the position of marker
1.
CALCulate<n>:DELTamarker<m>:SGRam:SARea
<SearchArea>
This command defines the deltamarker search area.
The command is available for the spectrogram.
Suffix:
<n>
.
1...4
Selects the measurement window.
Remote Commands in Receiver Mode
