Rohde & Schwarz ESRP Series, User Manual

Page: 636 / 1094

Remote Control
R&S
®
ESRP
633 User Manual 1175.7445.02 ─ 08
The command is available for the spectrogram.
Suffix:
<n>
.
1...4
Selects the measurement window.
<m> 1...16
Selects the marker.
Example: CALC:DELT2:SGR:Y:MIN
Activates and positions delta marker 2 on the minimum level of
the y-axis.
CALC:DELT2:SGR:Y:MIN:NEXT
Positions delta marker 2 on the next minimum level.
Usage: Event
CALCulate<n>:DELTamarker<m>:SGRam:Y:MINimum[:PEAK]
This command positions the specified delta marker on the current minimum level of the
vertical axis. The search is performed over all captured frames. It does not change the
horizontal position of the delta marker.
The command is available for the spectrogram.
Suffix:
<n>
.
1...4
Selects the measurement window.
<m> 1...16
Selects the marker.
Example: CALC:DELT2:SGR:Y:MIN
Activates and positions delta marker 2 on the minimum level of
the y-axis.
Usage: Event
11.4.2 Defining the Frequency
DISPlay[:WINDow<n>]:TRACe<t>:X:SPACing
.................................................................. 634
[SENSe:]FREQuency:CENTer
......................................................................................... 634
[SENSe:]FREQuency:CENTer:STEP
................................................................................634
[SENSe:]FREQuency:MODE
...........................................................................................635
[SENSe:]FREQuency:STARt
........................................................................................... 635
[SENSe:]FREQuency:STOP
............................................................................................635
Remote Commands in Receiver Mode