Rohde & Schwarz ESRP Series, User Manual

Page: 297 / 1094

Spectrum Measurements
R&S
®
ESRP
294 User Manual 1175.7445.02 ─ 08
Remote command:
CALCulate<n>:STATistics:NSAMples
on page 761
Scaling ← CCDF
Opens a submenu to change the scaling parameters of x- and y-axis.
x-Axis Ref Level ← Scaling ← CCDF
Opens an edit dialog box to enter the reference level in the currently active unit (dBm,
dBµV, etc). The function of this softkey is identical to the "Ref Level" softkey in the
"Amplitude" menu (see
"Ref Level" on page 323).
For the APD function this value is mapped to the right diagram border. For the CCDF
function there is no direct representation of this value on the diagram as the x-axis is
scaled relatively to the measured mean power.
Remote command:
CALCulate<n>:STATistics:SCALe:X:RLEVel
on page 766
x-Axis Range ← Scaling ← CCDF
Opens the "Range" submenu to select a value for the level range to be covered by the
statistics measurement selected.
Remote command:
CALCulate<n>:STATistics:SCALe:X:RANGe
on page 765
Range Log 100 dB ← x-Axis Range ← Scaling ← CCDF
Sets the level display range to 100 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG
, see
DISPlay[:WINDow<n>]:TRACe<t>:Y:
SPACing
on page 636
Display range:
DISP:WIND:TRAC:Y 100DB
, see
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
on page 812
Range Log 50 dB ← x-Axis Range ← Scaling ← CCDF
Sets the level display range to 50 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG
, see
DISPlay[:WINDow<n>]:TRACe<t>:Y:
SPACing
on page 636
Display range:
DISP:WIND:TRAC:Y 50DB
, see
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
on page 812
Range Log 10 dB ← x-Axis Range ← Scaling ← CCDF
Sets the level display range to 10 dB.
Measurements