Rohde & Schwarz AMU-K48 Operating Manual Download Page 78

Page: 78 / 88

Remote-Control Commands

IEEE 802.11 (a/b/g)

Operating Manual 1171.5283.12 ─ 18

Parameters:

<State>

0 | 1 | OFF | ON
*RST:

Example:

BB:WLAN:MODE CCK

selects physical layer mode CCK.

BB:WLAN:PSDU:PLCP:FORM LONG

selects long PLCP format.

BB:WLAN:PSDU:BRAT 1MBPS

sets a bit rate of 1MBPS.

BB:WLAN:PSDU:BSPR OFF

deactivates barker spreading.

[:SOURce<hw>]:BB:WLAN:PSDU:DATA

<Data>

The command determines the data source for the data field.

Parameters:

<Data>

PN9 | PN15 | PN16 | PN20 | PN21 | PN23 | DLISt | ZERO |
ONE | PATTern

PNxx

The pseudo-random sequence generator is used as the data
source. Different random sequence lengths can be selected.

DLISt

A data list is used. The data list is selected with the command

[:SOURce<hw>]:BB:WLAN:PSDU:DATA:DSELect

ZERO | ONE

Internal 0 and 1 data is used.

PATTern

Internal data is used. The bit pattern for the data is defined by
the command

[:SOURce<hw>]:BB:WLAN:PSDU:DATA:

PATTern

*RST:

PN9

Example:

BB:WLAN:PSDU:DATA PATT

selects as the data source for the data fields of burst 0, the bit
pattern defined with the following command.

BB:WLAN:PSDU:DATA:PATT #H3F,8

defines the bit pattern.

Manual operation:

See

" PSDU Data Sorce "

on page 31

[:SOURce<hw>]:BB:WLAN:PSDU:DATA:DSELect

The command selects the data list for the DLISt data source selection.

The lists are stored as files with the fixed file extensions

*.dm_iqd

in a directory of the

user's choice. The directory applicable to the following commands is defined with the
command

MMEMory:CDIR

. To access the files in this directory, you only have to give

the file name, without the path and the file extension.

PSDU Settings

Summary of Contents for AMU-K48

























































































Search results

Summary of Contents for AMU-K48

Reviews:

Related manuals for AMU-K48

Brands by name

Popular brands

Rohde & Schwarz AMU-K48, Operating Manual

Search results

Summary of Contents for AMU-K48

Reviews:

Related manuals for AMU-K48

Brands by name

Popular brands