Rohde & Schwarz AMU-K48, Operating Manual

Page: 79 / 88

Remote-Control Commands IEEE 802.11 (a/b/g)
79 Operating Manual 1171.5283.12 ─ 18
Parameters:
<DSelect> string
Example: BB:WLAN:PSDU:DATA DLIS
selects the Data Lists data source.
MMEM:CDIR '<root>Lists'
selects the directory for the data lists.
BB:WLAN:PSDU:MAC:DATA:DLIS 'wlan_list1'
selects file
wlan_list1
as the data source.
Manual operation: See " PSDU Data Sorce " on page 31
[:SOURce<hw>]:BB:WLAN:PSDU:DATA:PATTern <Pattern>, <BitCount>
The command determines the bit pattern for the PATTern selection. The maximum
length is 64 bits.
Parameters:
<Pattern> 64 bit pattern
*RST:
#H0
<BitCount> integer
Range:
1 to 64
*RST: 1
Example: BB:WLAN:PSDU:MAC:DATA:PATT #H3F,8
defines the bit pattern.
Manual operation: See " PSDU Data Sorce " on page 31
[:SOURce<hw>]:BB:WLAN:PSDU:DLENgth <Dlength>
The command sets the data length in bytes. In the framed mode, data field lengths of
up to 4095 bytes are possible. This corresponds to the maximum data length. The
unframed mode offers a data length of up to 100000 bytes.
If the data field length is changed, the generator calculates the number of OFDM data
symbols as a function of the set PSDU bit rate (
[:SOURce<hw>]:BB:WLAN:PSDU:
SCOunt
) .
Parameters:
<Dlength> float
Range:
0 to 4095 Bytes (framed); 100000 Bytes
(unframed)
*RST: 100Bytes (OFDM), 1024Bytes (CCK|PBCC)
Example: BB:WLAN:PSDU:DLEN 256
sets a data length of 256.
Manual operation: See " Data Length " on page 31
PSDU Settings