Rohde & Schwarz AMU-K48, Operating Manual

Page: 62 / 88

Remote-Control Commands IEEE 802.11 (a/b/g)
62 Operating Manual 1171.5283.12 ─ 18
Example: BB:WLAN:PAR:COS 0.5
sets B x T to 0.5 for the Gauss filter type.
Manual operation: See "Roll Off Factor / BxT" on page 39
[:SOURce<hw>]:BB:WLAN:FILTer:PARameter:LPASs <LPass>
The command sets the cut off frequency factor for the Lowpass filter (ACP optimiza-
tion) type.
Parameters:
<LPass> float
Range:
0.05 to 2
*RST: 0.5
Example:
BB:WLAN:FILT:PAR:LPAS 0.5
the cut of frequency factor is set to 0.5.
Manual operation: See "Cut Off Frequency Factor" on page 39
[:SOURce<hw>]:BB:WLAN:FILTer:PARameter:LPASSEVM <LPassevm>
The command sets the cut off frequency factor for the Lowpass filter (EVM optimiza-
tion) type.
Parameters:
<LPassevm> float
Range:
0.05 to 2.0
*RST: 0.5
Example: BB:WLAN:FILT:PAR:LPASSEVM 0.5
the cut of frequency factor is set to 0.5.
Manual operation: See "Cut Off Frequency Factor" on page 39
[:SOURce<hw>]:BB:WLAN:FILTer:PARameter:PGAuss <PGauss>
The command sets the roll-off factor for filter type Pure Gauss.
Parameters:
<PGauss> float
Range:
0.15 to 2.5
*RST: 0.5
Example: BB:WLAN:PAR:PG 0.2
sets the roll-off factor
Manual operation: See "Roll Off Factor / BxT" on page 39
[:SOURce<hw>]:BB:WLAN:FILTer:PARameter:RCOSine <RCosine>
The command sets the roll-off factor for the Root Cosine filter type.
Filter/Clipping Settings