R&S EU4200C
Audio via E1 Interface (Optional)
6174.8456.02-01
3.96
3.12.4
Limitations/Notes
Limitations
Please note that there are certain limitations to radio operation if the E1
interface is active:
Voice transmission is in AM mode. The ACARS and VDL Mode 2
modes are not supported
Parameter “Audio Delay” is not applicable to E1 interface
Parameter “Line Interface in Local Mode” is not applicable to E1
interface of the RX module. Audio over E1 interface is not muted in
Local Mode when the parameter is disabled
3.12.5
Parallel Operation of the Analog and E1 Audio Interfaces
Introduction
Analog interface functionality remains unchanged when E1 audio interface
is selected (see chapter 3.3).
RX Audio Basic
interface X10
Radio functionality related to the RX Audio Basic interface X10 remains
unchanged when the E1 audio interface is selected. The received
demodulated audio signal is available on the Analog and E1 interfaces in
parallel.
Note:
When in-band signalling is enabled (SQ or RSSI, see chapter 3.8
In-Band Signaling), the tones are present only on the RX Audio Basic
interface X10.
Summary of Contents for 6144.7800.02
