Installation Guide
rogerseller.com.au
Dimensions are approximate. Information provided in this installation guide is representative of the
actual product available at the time of printing. Due to our policy of continuous product development,
the design and specifications depicted are subject to change without notice. Please confirm all
particulars with your sales consultant prior to purchase.
Viega More
13
14
15
16
18
19
20
17
STEP 03
13. Slide the Bowden wire unit
onto the drain valve form the
left-hand side until it snaps
into place.
14. Replace the spacer into the
cistern and attach onto the back
wall of the cistern.
15. Turn the threaded bolts
through 90˚ to secure them
inside the drilled holes in the
duct. The relevant depth of
the threaded bolts should be
taken from the instructions
for use of the actuating panel.
16. Attach the Bowden wire
unit to the rear of the base
plate. Observe colour coding.
Green Bowden wire should
be attached to the place
marked with a green dot.
17. Remove the push plate
from the base plate.
More Series – Remove by hand.
Style Series – Use suction cups
provided.
18. Attach the base plate and
screw it into place with the
screws supplied.
19. Inset the push plate into
the base plate.
20. Style Series – Please keep
the suction caps provided,
they will be needed for future
maintenance.
All manuals and user guides at all-guides.com
