Installation Guide
rogerseller.com.au
Dimensions are approximate. Information provided in this installation guide is representative of the
actual product available at the time of printing. Due to our policy of continuous product development,
the design and specifications depicted are subject to change without notice. Please confirm all
particulars with your sales consultant prior to purchase.
Viega More
1
2
3
4
5
6
7
8
10
11
12
STEP 01
1. Remove the duct cover.
2. Cut in the corners of the duct
as far as the surface of the wall
then fold up the sides. The edge
of the duct must now be flush
with the surface of the wall.
3. Remove internal cover.
4. Unlock the mechanism.
STEP 02
(Bowden wire unit)
9. Remove the Bowden wire
unit from the push plate box.
10. Remove the bracket from
the underside of the Bowden
wire unit.
11. Press the Bowden wire
unit together.
12. Replace the bracket onto
the underside of the Bowden
wire unit.
5. Unhook the bar from the drain
valve. Take the mechanism out
of the front. You can dispose
of these parts.
6. Press the clip of the spacing
element together and remove
the spacer through the top.
7. The spacer can be removed
through the front.
8. Pull the drain valve upwards.
9
All manuals and user guides at all-guides.com
