HRT82MF-CH Installation Guide.doc
2018-09-21
2/11
1.
I
NTRODUCTION
This manual contains minimum information that is necessary to properly install device. Following
documents supplement this manual:
Functional description of HRC series controllers
Installation guide for HRC series controllers
In order to acquire the first one it is necessary to obtain Roger consent and sign non-disclosure
agreement (NDA). The second one is available at
2.
D
ESCRIPTION AND SPECIFICATION
HRT82MF-CH card holder is peripheral device used in a hotel system based on HRC series
controllers. The device communicates with controller using RACS CLK/DTA bus and periodically
reads card in its holder in order to enable monitoring of card owner presence (i.e. guest or hotel
staff) in hotel room. Such monitoring can be used for 230VAC power supply switching, air
conditioning and/or hotel automation control. The device enables serial number (CSN) reading for
such cards as MIFARE® Ultralight/Classic/Plus/Desfire. Additionally it allows to read configurable
Mad Sector Number (MAD) and Sector Serial Number (SSN) as well as combinations of CNS and
MSN or SSN for MIFARE Classic cards.
HRT82MF-CH front panel includes card holder. The device is equipped with front panel backlight
and buzzer. The device is offered in two versions: HRT82MF-CH for surface mounting and
HRT82MF-CH-F for flush mounting.
Table 1. Specification
Supply voltage
Nominal 12VDC, min./max. range 10-15VDC
Proximity cards
13.56MHz in acc. with ISO14443A and MIFARE
Reading distance
Up to 15 cm for ISO cards (depends on card type and quality)
Average current
consumption
60mA
Tamper resistance
Isolated contact, NC type (normally closed when enclosure is assembled
and attached), 24V/50mA
Distance
Between controller and HRT device (RACS CLK/DTA): max. 150m
Environmental class
(acc. to EN 50131-1)
Class II, indoor general conditions, temperature: -10°C- +50°C, relative
humidity: 10 to 95% (no condensation)
IP code
IP41
Dimensions HxWxD
HRT82MF-CH:
85 x 85 x 27 mm
HRT82MF-CH-F:
105 x 105 x 31 mm
Weight
~ 100g
Certificates
CE
