EN
11
12
13
14
12.3
Installation procedure
1. Insert the connector
M1
on the boom
D1
by half of its length (375 mm), fig. 11.
2. Fasten the boom to the connector using the 10 self-drilling screws [
L
] included, 5 above and 5 under, along the boom axis, at a distance of 60 mm apart, fig. 11.
3. (Fig. 12) Insert the boom
D2
on the other half of the connector and fasten it according to the description above.
4. In this way, the boom will have a length of 8.2 m (fig. 12).
5. Fasten the boom support base [
A
] to the flange [
C
] with the 8 M12x30 zinc coated screws [
B
] and tighten them firmly (fig. 13).
6. Insert the connector
M2
completely inside the boom.
7. Fasten the boom to the connector
M2
with the 10 self-drilling screws [
L
] included, 5 above and 5 under, along the boom axis, at a distance of 60 mm apart, fig. 13.
8. Insert the finishing collar [
I
] on the boom.
9. Insert the boom in its seat on the support [
A
].
10. Fit the steel bracket [
F
] and screw the 8 M10x20 zinc coated screws [
E
] on the boom support [
A
] and tighten them firmly.
11. Fasten the bracket [
F
] with 4 self-drilling screws [
L
] and tighten them firmly.
12. Insert the led covers on the boom, first the
N1
and then the
N2
and then the protective rubbers, first the
P1
and then the
P2
(fig. 14).
13. Lastly, fit the aluminium cover [
G
] and fasten it with the 6 M8 stainless steel screws [
H
], included.
14. Refit the end flange
R2
and the plug
Q2
fastening them with the two screws included.
375
60
375
M1
L x10
D1
C
B
D1
F
E
A
M2
L x4
L x5
I
L x5
60
M1
L x10
D2
D1
G
H
N1
N2
P1
P2
Q2
R2
