Rofin PowerLine E Air 10, Maintenance And Integration Manual

Page: 45 / 78

Integrating the laser system
PowerLine E Air 35
4.2.3 Digital outputs marker control
Target value: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24V DC
Signal logical 1 corresponds to: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+24V (+20 ... +30V)
Signal logical 0 corresponds to: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0V @ R
load
≤
100 k
Ω
Max. load: (transistor output). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
Short-circuit proof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . yes
4.2.3.1 End of marking
4.2.3.2 Job ended
4.2.3.3 Software loaded (system ready)
8 Bit M-functions are available:
–
Bit 8 and 9 on -X42b
– Bit 10 to 15 on -XC3a
-X42b:
-X42b:
-XC3a:
XC3a:
XC3a:
XC3a:
XC3a:
XC3a:
n=
24
25
1
2
3
4
5
6
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
If no marking takes place, this output has logical
signal 1 (+24V).
This signal output is also available on -X46 (see
Section "4.3, External control panel -X46" on
page 43).
As long as a marking job is loaded, this output
has the logical signal 0 (0V).
This signal output is also available on -X46 (see
Section "4.3, External control panel -X46" on
page 43).
As soon as the marking software is loaded, this
output has logical signal 1 (+24V).
This signal output is also available on -X46 (see
Section "4.3, External control panel -X46" on
page 43).
-X42b : 7
-X42b : 5
-X42b : 8
+24V
-X42b : 7
-X42b : 16
-X42b : 8
+24V
-X42b : 7
-X42b : 18
-X42b : 8
+24V