Operating instructions
BA_M4301_EN
3 / 18
Cleaning process!
The product must not be cleaned with:
•
vacuum steam procedure, steam ray or high-pressure
cleaner
•
abrasives, scouring pads or other blunting materials
•
cleaning agents with corrosive or caustic ingredients
•
organic solvents as halogen or aromatic hydrocarbons and
ketones (cellulose thinner, acetone, etc.), since this can
damage the product.
Note
Qualification of personnel
All works may only be effected by qualified personnel familiar
with the handling of hydraulic components.
1.5.3
Warning
WARNING
Injuries due to misuse, incorrect operation or abuse!
Injuries can occur if the product is not used within the intended
use and the technical performance data.
•
Before start up, read the operating instructions!
1.6
Personal protective equipment
For works at and with the product,
wear safety goggles!
For works at and with the product,
wear protective gloves!
For works at and with the product,
wear safety shoes!
1.7
Safety devices
The below safety devices are for the safety of the operators. As
a matter of principle no safety devices may be detached, put
out of action or modified.
Used safety devices
Figure 1: Positions of the safety devices
I
Name plate with details of
max. load, etc. (position
can vary)
O Mandatory sign "Read and
follow the operation in-
structions"
1.8
Check the safety devices
Note
Use the regulations
•
To check the safety device use the check lists "General
examination" and / or "Functional testing". Eliminate imme-
diately recognised defects at the safety devices.
Testing intervals
•
at the beginning of every shift
•
once a week in case of continuous shift
•
after each maintenance or repair
Testing content
•
Function
•
State and position
•
Safe fixing
General examination
Covers
Number, available and un-
damaged
Screw plugs
Number, available and un-
damaged
Name plates with specifica-
tions
Number, available, readable
and undamaged
Danger signs
Number, available and un-
damaged
