4
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ INSTRUCTIONS BEFORE OPERATING THE EQUIPMENT
1) For your own safety, please read the user manual before operating or connecting the unit.
2) The user manual must be in possession of the owner of the mixing panel. This manual
must be kept on a safe place for future reference.
3) The mixing panel must always be connected to a mains power supply net with appropriate
grounding. This is necessary for the optimal working of the mixing panel and to assure the
safety of the user.
4)
Always handle the power cord by the plug, do not pull the cord. Do not use broken or
damaged power cord or plug. Damaged power cords or plugs can cause fire or create
shock hazard.
5) Do not open the set; there are no serviceable parts inside. Only qualified service
technicians can service inside your set.
6) Do not expose to rain or water. Do not spill liquid or insert (metal) objects inside the set.
Rain, water or liquid such as cosmetics as well as metal, may cause electric shocks, which
can result in fire or shock hazard. If anything gets inside, immediately unplug the power
cord.
7) If the mixing panel is not used for a longer period (more than one day), please disconnect
the power cord from the mains net. Switching off the power switch does not completely
turn the mixing panel off.
8)
WARNING!
The sound and intensity volume of this product can be very strong and, if not
used properly, or if used in too close proximity, can cause temporary or permanent
damage to one’s hearing, perhaps even deafness. Use with caution and common sense.
INSTALLATION OF THE MIXING PANEL
1) The set can be used in every position.
2) Do not place the set into direct sunlight, or in a warm moist or dusty place. The operating
environment temperature should be b5°C and +35°C. The relative humidity of the
air should be below 85%.
3) Always place the unit in a well-ventilated area.
4) To avoid disturbances, do not place the set near disturbing equipment, such as
transmitters, cell-phones, electro-motors, etc.
5) Avoid dust (like ashes from cigarettes) to fall on the mixing panel. Also avoid smoke from
(for instance smoke machines or cigarettes) entering the unit. Smoke will accelerate wear
on the electronic circuits, potentiometers and faders of the mixing panel.
6) Do not place heavy or sharp objects on the mixing panel, these can damage the knobs,
switches, LEDs, etc..
7) Manipulate the console with care. Avoid abrupt movements of the controls.
8) If the mixing panel has to be transported, please use the original packaging or use an
appropriately built flight case. Avoid shocks.
CLEANING OF THE MIXING PANEL
1) Do not use chemical products or solvents to clean the set. To clean the mixing panel, it is
best to use a soft brush or a dry lint-free cloth.
2)
Do not use contact spray or other products in the faders. The contact spray can damage
the faders.