29
Options
1)
USB I/O
set MX00
Optional input/output kit to connect the mixing panel with a computer. The USB connector
contains 1 stereo input signal and 1 stereo record output signal. With this option music can be
played from a computer via USB. Simultaneous the mixed music can be recorded via the
computer. The option must be built in as follows: First pull off the fader knobs (9, 14, 15, 19 &
20) at the frontpanel. Then unscrew the aluminum fader cover plate (6 screws). Take of this
aluminum plate. Then unscrew the bottombox, 3 screws at the frontpanel, one screw at each
side and 3 screws at the bottom.
Screw of the hole cover plate (at the backpanel) which covers the desired hole for the USB
option set. Place the USB option so that the 6 pole angled connector on the USB PCB fits in
the 6 pole angled connector on the input PCB. Screw the screw in the hole in the backpanel to
mount the USB option kit. Close the mixing panel again by replacing the bottombox (8 screws),
the aluminum fader cover plate (6 screws) and the fader knobs (12 pieces).
Connect the USB I/O set to a computer via a USB-cable. The computer will recognize the USB
I/O set. Select the USB I/O set as playback- and recording device in the sound and audio
configuration menu of the computer or audio-software.
The USB I/O set MX00 can be ordered at every authorized RODEC-dealer.
Order code: 94 001 0070
2)
Alarm/Music mute/Priority in set MX00
With this optional set, the music can be muted or decreased in volume remote controlled.
This can be used to connect a fire-alarm system to the mixing panel so that the music mutes
automatically when a fire-alarm signal appears. Through the priority input an automatically
starting alarm message can be reproduced.
Another application of this set is controlling the output volume of the mixing panel remote
controlled. In this way another person than the DJ can decide at every moment how loud the
music is played in the venue.
The option must be built in as follows: First pull off the fader knobs (9, 14, 15, 19 & 20) at the
frontpanel. Then unscrew the aluminum fader cover plate (6 screws). Take of this aluminum
plate. Then unscrew the bottombox, 3 screws at the frontpanel, one screw at each side and 3
screws at the bottom.
Screw of the hole cover plate (at the backpanel), which covers the holes for the Alarm/Music
mute/Priority in set. First connect the 6 pole connector of the optional alarm/music mute/priority
in set to the 6 pole connector on the output PCB (68 001 0050). Screw the alarm/music
mute/priority set to the backpanel with the screw (delivered together with the set). Close the
mixing panel again by replacing the bottombox (8 screws), the aluminum fader cover plate (6
screws) and the fader knobs (12 pieces). Now the alarm/music mute/priority in set is ready to
use.
The alarm/music mute/priority in set MX00 can be ordered at every authorized RODEC-dealer.
Order code: 94 001 0071
3)
Digital optical input channel
fader MX00 set
Users can upgrade their mixing panel with digital faders on the music input channels. The
digital faders replace the standard analogue faders. The option must be built in as follows: First
pull off the fader knobs (9, 14, 15, 19 & 20) at the frontpanel. Then unscrew the aluminum fader
cover plate (6 screws). Take of this aluminum plate. Unscrew the channel fader, which you like
to replace (2 screws). Pull off the 4 pole flat cable at the input PCB. Place the 10 pole flatcable
(delivered together with the digital optical input channel fader set) on the 10 pole connector
(right below the PFL switch) on the input channel PCB. Connect the other side of the flatcable
to the digital optical input channel fader. Screw the fader to the frontpanel (2 screws), attention,
the 10 pole connector on the fader PCB must be placed at the side of the crossfader (14).
Replace the aluminum fader cover plate and fader knobs. The digital optical input channel fader
is ready to use.