30
The digital optical input channel fader MX00 set can be ordered at every authorized RODEC-
dealer.
Order code: 94 001 0072
4)
Digital optical
crossfader MX00 set
The standard analogue crossfader can be upgraded by a digital optical crossfader. The option
must be built in as follows: First pull off the fader knobs (9, 14, 15, 19 & 20) at the frontpanel.
Then unscrew the aluminum fader cover plate (6 screws). Take of this aluminum plate. Then
unscrew the bottombox, 3 screws at the frontpanel, one screw at each side and 3 screws at the
bottom. Unscrew the crossfader (2 screws). Pull off the 4 pole flatcable of the crossfader on the
output PCB. Place the 10 pole flatcable (delivered together with the digital optical crossfader
set on the 10 pole connector on the output PCB. Connect the other side of the flatcable to the
digital optical crossfader. Screw the digital optical crossfader to the frontpanel (2 screws),
attention, the 10 pole connector on the fader PCB must be placed at the opposite side of the
output PCB. Replace the bottombox (8 screws), the aluminum fader cover plate (6 screws) and
fader knobs. The digital optical cross fader is ready to use.
The digital optical cross fader MX00 set can be ordered at every authorized RODEC-dealer.
Order code: 94 001 0073
5)
Standard knobs set MX00 series
The knobs of a MX00 series mixing panel can be ordered in a set. For a MX3000 you need 2 of
these sets to replace all the knobs.
The standard knobs set MX00 series can be ordered at every authorized RODEC-dealer.
Order code: 94 001 0074
6)
Fader knobs BX/CX/MX MKIII/MX00 series
The fader knobs of a MX00 series mixing panel can be ordered in a set. For a MX3000 you
need 2 of these sets to replace all the fader knobs.
The fader knobs BX/CX/MX MKIII/MX00 series can be ordered at every authorized RODEC-
dealer.
Order code: 94 001 0041