ADMINISTRATIVE FUNCTIONS
You can perform certain administrative functions with X5. These functions are only available
when X5 is first powered up.
CAUTION: Please read the following instructions carefully and follow them when performing
administrative functions.
Changing your User password
You can change your
user password
with X5. It is recommended that you change the default
factory password to another one that only you know. Follow these steps to change your
password.
1.
Power up X5 by connecting to the host via USB or FireWire. Ensure the STATUS LED blinks
once.
2.
Press the
Change Pin
button, followed by the
‘1’
button.
3.
Press
Enter
. The Status LED will blink three times.
4.
Enter the
user ID
together with the
current password
and press
Enter
. The Status LED blinks
twice to notify that you may press the new password.
Example –
1
12345678 ->
Enter
5.
Enter the
user ID
together with the
new password
and press
Enter
. The Status LED blinks
twice to notify that you may press the confirmed new password.
Example –
1
87654321 ->
Enter
6.
Enter the
new confirmed password
and press
Enter
.
Upon a successful change, X5 will proceed to connect the drive. At the same time, the Status
LED will blink three times and there will be two ‘beep’ sounds upon a successful password
change. If not, the Error LED will blink continuously.
Note:
•
Changing the password of user ID 1 does NOT change the password of user ID 2 and 3.
Likewise for all other user IDs.
•
The user is responsible to remember his/her password. X5 will lock out the
user after three (
3
) incorrect attempts. Only the administrator, who
presents the correct admin password, can reset the password of the locked
out user.
ROCSECURE
|
AMPHIBIOUS X5 user manual
Page | 22