AUTHENTICATION
Amphibious X5 requires users to authenticate themselves via single-factor authentication
before they are granted access to the installed drive. In order to do so, users must present PIN
(Pin Number = Password - something you know). The authentication process involves typing
(slowly) the correct Password (PIN entry) onto Amphibious X5. Upon completion, the connected
drive will present itself to the operating system, and can be used like a normal external drive.
ENTERING YOUR PASSWORD
Each X5 unit allows a maximum three (3) users to log in, where the user is identified by
user ID
–
1
,
2
and
3
. The default factory password for each user is
“
12345678
”
. To log into X5, simply
press the user ID together with the password, followed by the
Enter
button.
For example, a user logs in as
1
12345678
->
ENTER
is identified as User ID 1, with a password of 12345678
User ID 2
2
12345678
->
ENTER
Is identified as User ID 2, with a password of 12345678
User ID 3
3
12345678
->
ENTER
Is identified as User ID 3, with a password of 12345678
IMPORTANT NOTES:
•
Ensure X5 completes its Power-on Self Tests (which takes about a quick 2 sec) before key
entry. The STATUS LED should give a quick blink.
•
If an incorrect password is entered, the Error LED will blink continuously. Press the Esc
button to restart the authentication process. If you have mistyped your password, press
the Esc key at any time to restart the entire authentication process.
ROCSECURE
|
AMPHIBIOUS X5 user manual
Page | 18