Page 8
Rocky Mountain Westy - Ph. (970) 310-3441
Flip both the
Upper Ladder Stringer
and the
Lower Ladder Stringer
over to expose the small hole in
the
Upper
Ladder Stringer
.
You can now line up with the threaded hole in the
Middle Block.
Slide the
Middle Block
into the open end of the
Upper Ladder Stringer
until the threaded hole of the
Middle Block
lines up with the small hole in the
Upper Ladder Stringer.
Take a
1/4x20x1 SS Button Head Screw
and a
1/4 SS Washer
from
Hardware Package A
and hand
thread the screw
into both the
Upper Ladder Stringer
and the
Middle Block.
Use a
5/32” Hex Bit Socket
and a
Ratchet
in order to
fully tighten the
Button Head Screw.
Repeat the process for the
other
Upper Ladder Stringer
as well.