Page 5
Assembling the Ladder
We recommend laying the
Upper Ladder Stringers
and the
Lower Ladder Stringers
onto a table or flat work surface.
Remove the
Upper Blocks
and
Middle Blocks
from
Hardware Package A.
Study the
diagram below carefully and
place your components in the same fashion.
The
Upper Ladder Stringer
has three small holes on one side of the stringer. The
Lower Ladder Stringer
has three
small holes as well as one large hole on one side of the stringer. The orientation of these stringers is very important
so please make sure you have the items laid out exactly as shown above prior to moving on.