Page 7
Rocky Mountain Westy - Ph. (970) 310-3441
Slide the
Middle Block
into the open end of the
Lower Ladder Stringer
until the threaded hole of the
Middle Block
lines up with the small hole in the
Lower Ladder Stringer.
Take a
1
/4x20x1 SS Button Head Screw
and a
1/4 SS Washer
from
Hardware Package A
and hand
thread the screw
into both the
Lower Ladder Stringer
and the
Middle Block.
Use a
5/32” Hex Bit Socket
and a
Ratchet
in order to fully
tighten the
Button Head Screw.
Repeat the process for the
other
Lower Ladder Stringer
as well.