12
CIRCULAR SAW (SKIN)
EN
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
RCM marking
Do not dispose of batteries, Return
exhausted batteries to your local
collection or recycling point.
Do not burn
Do not expose to rain or water
For indoor use only
Fuse
Positive terminal
Negative terminal
Read the operator’s manual.
ABN: Australian Business Number. By this number,
business information such as entity type, status,
business location etc. can be found at website
http://abr.business.gov.au.
ABN of Positec Australia Pty Ltd is 14 101 682 357
TECHNICAL DATA
Voltage
18V
No load speed
4500 /min
Blade diameter
150 mm
Cutting capacity
Cutting Depth at 90°
45mm
Cutting Depth at 45°
30mm
Bevel capacity
0-45 degree
Machine weight
2.08kg
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the instruction
book carefully.
I
ntended Use
The machine is intended for lengthways and
crossways cutting of wood with straight cutting lines
as well as bevel angles to 45° while resting firmly on
the work piece.
CHARGING PROCEDURE
BEFORE PUTTING INTO OPERATION
A) CHARGING THE BATTERY
The battery charger supplied is matched to the Li-
ion battery installed in the machine. Do not use
another battery charger.
The Li-ion battery is protected against deep
discharging. When the battery is empty, the
machine is switched off by means of a protective
circuit: The tool holder no longer rotates.
In a warm environment or after heavy use, the
battery pack may become too hot to permit
charging. Allow time for the battery to cool down
before recharging.
When the battery pack is charged for the first time
and after prolonged storage, the battery pack will
accept a 100% charge after several charge and
T 3.15A
