Exploring the setup of Automatic Device Configuration (ADC)
1.
Open the PowerFlex 525-EENET module properties by Double-click on the PowerFlex 525-EENET node in the I/O
Configuration folder to display the Module Properties screen.
2.
Click on the Drive tab.
The drive AOP requires user action to enable ADC. This helps ensure that the user understands ADC operation prior
to turning it on. The drive AOPs also have an ADC icon on the Drive tab that shows if ADC is enabled (green arrow) or
disabled (gray arrow) for the respective drive.
3.
Click on the ADC
button.
This will open the Automatic Device Configuration setup window.
4.
The picture below shows how you would enable or disable Automatic Device Configuration (ADC) for the PowerFlex
525 drive and it’s peripherals (if applicable). Click
IMPORTANT: In order for setting changes to take effect, you must Click Apply and then the [X] to close.
Page
61
of
64
