`
Make sure all the Pages have the black check
to the left of the page name / icon.
Click the Finish >>
button to accept pending changes.
11.
The main PowerFlex 525 window will be present. Click the Reset
button for the Ethernet communication settings
to take affect.
Click OK. You will hear the PowerFlex 525 cycle power and the HIM Keypad display turn off and on and start scrolling the
drive power ratings
12.
This is a pretty quick process. You will see the following screen.
Click OK.
13.
You will see the main PowerFlex 525 screen go from this…
to this once…the Connected Components Workbench™ software has re-established it’s connection with the drive.
14.
Exit Connected Components Workbench software; we will not save any of the configuration files so the answer is no to
save. If you were working on your project of course you would say yes to save... “Just in case”
Page
40
of
64
