Rockwell Automation Allen-Bradley ClearMultiprint 1492-PRINTCMP, Quick Start Manual

Page: 24 / 31

24 Rockwell Automation Publication 1492-QS003B-EN-P - October 2019
Chapter 5 Calibration
Adjust the Print Position/Calibration
1. To view the calibration settings, click the Information tab at the bottom of the screen.
2. Click Edit.
3. Click the ellipsis.
4. Visually check the printed tag and see where the "Xs" are in relationship to the tag.
– If your "Xs" are shifted down on the tag, see Figure A.
– If your "Xs" are shifted up on the tag, see Figure B.
– If your "Xs" are shifted right on the tag, see Figure C.
– If your "Xs" are shifted left on the tag, see Figure D.
IMPORTANT The print position measurements are shown in millimeters, and the values correspond to actual position on the label.