Rockwell Automation Allen-Bradley CENTERLINE 600, User Manual

Page: 18 / 110

18 Rockwell Automation Publication 1512A-UM101B-EN-P - December 2021
Chapter 2 Installation – Standard Enclosure
Rear Access
1. Remove the hardware securing the center rear bus access cover
( Figure 8 ).
2. Remove the center rear bus access cover.
3. Once the rear bus cover is removed, you will see the three busbars
( Figure 9 ).
Figure 8 - Access to Power Bus from Side and Rear of Cabinet
Figure 9 - Rear Power Bus Access, Rear Panel Removed
Side Access
A side bus access cover is on each side of the controller.
1. Remove the hardware from the appropriate side bus access cover.
2. Remove the side bus access cover.
3. Once the side bus access cover is removed, you will see the three busbars.
( Figure 10 ).
Side Bus
Access Cover
Center Rear Bus
Access Cover