Rockwell Automation Publication 48CR-UM001A-EN-P - November 2019
47
Parameter Overview
Chapter 7
Internet Protocol
Use this display to configure the Internet Protocol (IP) settings. You must be
online to configure IP settings.
This display shows the IP settings configuration mode of the module. Click the
appropriate button to configure the IP settings:
• Manually configure the IP settings
• Obtain IP settings automatically with DHCP
If you use the switches on the module to set the IP address, the fourth setting - IP
settings set by switches on the module - is set automatically. You cannot select this
control. This option appears dimmed if the module does not support setting the
IP address via switches.
To disable this mode, change the switch settings on the module and then reset it.
You can reset the module by cycling power to the module or by pressing the Reset
button on the Module Info tab.
Internet Protocol (IP) Settings controls are dimmed when:
• The module is offline
• The module is online and a communication error occurs
Physical Module IP Address
Shows the physical IP address of the module or, if you selected to configure the IP
settings manually, enter a valid physical module IP address.
See
for valid values for the IP address.
Physical Module IP Address appears dimmed and has no value when offline or
when online and a communication error occurs.
AOP View Only*
* Not available in WebConnect
