manualshive.com logo in svg

Rockwell Automation 2711C-F2M, Quick Start Manual

Share
Download
Rockwell Automation 2711C-F2M Quick Start Manual Download Page 43

Publication 2711C-QS001F-EN-P - November 2010

43

Configure Communication        

Chapter 4

Save the Application

The first time you save an application, a dialog opens where you can rename the application to something 
more meaningful. By default, applications are saved to internal storage of the terminal. You can also save 
applications to a USB flash drive or SD memory card if one is loaded in the terminal. All PanelView 
Component terminals support a USB flash drive. The PanelView Component C600 and C1000 terminals also 
support an SD memory card.

1.

Click the Save Application 
icon on the application 
toolbar.
A dialog opens the first 
time you save.

2.

Replace the default name 
with SampleApplication.

3.

Accept Internal as the Save 
to location.

4.

Click Save to close the dialog 
and save the application.

5.

Click OK when you receive 
notification that the 
application has been saved.

TIP

Always save the application to internal storage if 
you want to edit and run the application on the 
terminal.

Summary of Contents for 2711C-F2M















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands