Rocktron VOODU Valve User Manual Download Page 24 | Manualshive

Page: 24 / 108

background image

21

The SPEAKER SIMULATOR function is included in all presets and provides a

realistic approximation of a miked speaker cabinet for applications involving

connecting the Voodu Valve directly to a mixing board, recording system or

other full range system.

When a preset is recalled which has the Speaker Simulator on for either the

left channel or both channels, the front panel SPKR SIM LED will light.

Note:

The parameters provided in this function are operational only when

the SPKR SIM parameter under the Global function is stored UNLOCK, LOCK L or

LOCK B.

The PARAMETER SELECT control will allow you to access these SPEAKER SIMULATOR

parameters:

SPKR SIM I/O

SPKR TYPE

MIC PLACEMENT

REACTANCE

The SPEAKER SIMULATOR parameter allows you to select whether
the Speaker Simulator is on for BOTH outputs, on for only the LEFT
output or OFF.

The SPEAKER TYPE parameter determines the type of speaker to be
simulated. 15",12",10", 8" and full range speakers are available.

The MIC PLACEMENT parameter simulates a microphone placed
anywhere from the center of the speaker cone out to the edge of the
cone. Positive parameter values simulate moving the microphone
toward the center of the speaker, while negative values move it to the
edge.

The REACTANCE parameter simulates the characteristics of the the
interaction between a tube amplifier and a guitar speaker cabinet. The
higher the parameter value selected, the more these characteristics will
be apparent. Negative values of reactance can be used to simulate an
open-back cabinet.

SPEAKER SIMULATOR Function

«
...
22
23
24
25
26
...
»

Summary of Contents for VOODU Valve













































































































Reviews:

No comments

Related manuals for VOODU Valve

Brand: NAD Pages: 2

Brand: NAD Pages: 24

Brand: EBS Pages: 4

Brand: EAW Pages: 16

Brand: Lab.gruppen Pages: 5

Brand: Lab.gruppen Pages: 2

fP Series FP 2400Q

Brand: Lab.gruppen Pages: 20

PLM Series PLM 10000Q

Brand: Lab.gruppen Pages: 25

fP Series FP 2200

Brand: Lab.gruppen Pages: 2

Brand: Lab 12 Pages: 8

Brand: NAD Pages: 18

Brand: Lab.gruppen Pages: 2

Brand: ValveTrain Amplification Pages: 6

Brand: Yuasa Pages: 12

Brand: Madison Pages: 51

Brand: Advance acoustic Pages: 11

Brand: Pronomic Pages: 16

Brand: Richie Kotzen Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands