Rocktron INTELLIFEX User Manual Download Page 44 | Manualshive

Page: 44 / 58

background image

41

9. MIDI Operation

A. MIDI Controller Assignment

Controller mapping allows for specific Intellifex adjustable parameters to be mapped (or assigned) to a MIDI controller

number for real-time control (via a pitch wheel, expression pedal, etc.) in live performance situations. Any parameter may be
assigned to any controller number, from controller 0 through controller 120, or OFF. In the OFF position, the assigned
parameter will not respond to any MIDI control change. Each preset allows for up to 8 controllers.

The Controller Assign function is accessible in user presets 1-80. Factory presets 81-160 do not include this function.

Turn the PARAMETER SELECT control to access the first parameter of the Controller
Assign function. This parameter allows for the selection of a controller number which the
first parameter (selected in Step 5) will respond to.

Step 1

To access the Controller Assign function, turn the FUNCTION SELECT control one step
clockwise past "Title Edit".

CONTROLLER ASSIG

Step 2

NUMB1

XXX

Use the PARAMETER ADJUST control to select the controller number to be assigned to
the first parameter (PARA1). You may choose any number from 0 to 120, or OFF so that
the parameter will not respond to MIDI controller changes. Match this number with the
MIDI transmitter controller number.

Step 3

After selecting the desired controller number, press the STORE button to save the number.
"STORED" will flash briefly on the display.

Step 4

NUMB1

7

STORED

3,6,9,12

4,7,10,13

1

2,5,8,11

«
...
42
43
44
45
46
...
»

Summary of Contents for INTELLIFEX



























































Reviews:

No comments

Related manuals for INTELLIFEX

Brand: Campbell Pages: 2

Brand: Gatekeeper Pages: 8

Bure Rise & Go DB 56-309

Brand: Gate Pages: 8

Brand: Laser Pages: 2

Brand: Lars Thrane Pages: 50

Brand: Rain-Flo Irrigation Pages: 16

Brand: Palmer Pages: 2

i-limb access hand

Brand: Össur Pages: 246

PROPRIO FOOT PSX01

Brand: Össur Pages: 374

Brand: MacDon Pages: 238

Brand: JBM Pages: 13

Brand: U-Line Pages: 6

Brand: Petzl Pages: 15

Brand: REED Pages: 12

Brand: TEUCER Pages: 4

LI2606.000 Series

Brand: Handicare Pages: 8

Brand: BH FITNESS Pages: 45

Brand: KUHN Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands