Rocktron Blue Thunder User Manual Download | Manualshive

Page: 30 / 64

background image

The Speaker Exciter adds spacial dynamics to your tone. It is an excellent

tool in live and recording situations. It is extremely useful in live situations
where you may need to play at lower volumes but need to be pronounced with a
solid low-end response. The Sonic Clarity and Sonic Boom controls will
provide these characteristics.

In recording situations or when connecting directly to a PA system, the

cabinet simulator function will reproduce the frequency characteristics of a bass
speaker cabinet. This will allow you to make your presets compatible for both
live and recording purposes.

To access this function you must first press the “EDIT” button to enter into the

“EDIT MODE” and turn the FUNCTION SELECT knob to the right until SPEAKER

EXCITER appears on the display.

The PARAMETER SELECT control will allow you to access each of the following

Speaker Exciter parameters

The PARAMETER ADJUST control allows you adjust the selected parameter:

SPEAKER

exciter

Function

SPKR Exciter

SPKR TYPE

SONIC CLARITY

sONIC BOOM

cabinet sim

The SPEAKER EXCITER parameter determines whether the Speaker Exciter circuit is active or
bypassed for the current preset. Select ON to activate the Speaker Exciter - Select OFF to bypass
the Speaker Exciter.

The SPEAKER TYPE parameter determines the type of speaker to be simulated. 15", 12" 10", 8"
and full range speakers are available.

The SONIC CLARITY parameter enhanses the overall articulation of your playing by boosting or
cutting the middle high frequencies depending on the value selected.

The SONIC BOOM parameter will add depth to your sound by boosting the perception of low-end.

CABINET SIM - Allows you to record direct or plug directly into a PA system - eliminating the
need to carry a heavy amplifier to the gig! The Cabinet Sim is a special frequency response curve
that r e-creates the natural average frequency response curve found with Bass spea ker cabinets.
Using the Speaker Exciter along with the Cabinet SIM is the ultimate sound shaping tool for direct
live and recording applications.

Functions and Parameter Descriptions

27

*HINT - when you are ready to record direct or plug into a pa system - turn on the
cabinet simulator on the presets you want to use and you will be ready to go!

«
...
28
29
30
31
32
...
»

Summary of Contents for Blue Thunder

































































Reviews:

No comments

Related manuals for Blue Thunder

PowerLight PL-3.4

Brand: QSC Pages: 2

Brand: QSC Pages: 2

Brand: Aesthetix Pages: 11

Brand: Cloud Pages: 36

Brand: VOX Amplification Pages: 16

Brand: ALLNIC AUDIO Pages: 24

Brand: McIntosh Pages: 2

Brand: DTC Audio Pages: 4

Brand: Rega Pages: 17

Brand: Parallel Audio Pages: 12

Brand: PRESONUS Pages: 18

Brand: DAPAudio Pages: 18

Brand: Opengear Pages: 36

Brand: IRT Pages: 16

Brand: HAMTRONICS Pages: 5

Brand: Classe Audio Pages: 26

Brand: Jule Amps Pages: 5

Brand: Xicom Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands