42
MIDI, Page 7 of 7 - MIDI Receive Channel
The seventh page of the MIDI program,
MIDI Receive Channel
, determines
the MIDI channel that incoming program changes must be on for the All Access
to respond.
(This feature is operable only in Bank Mode - see SETUP, Page 1).
To define the MIDI receive channel:
(
) With the 2ND L.E.D. still lit, press the "
ð
" switch to access the next page
of the MIDI program,
MIDI Receive Channel
. (If the All Access is not
already in the MIDI editing mode, press "2ND", then "MIDI", followed by
"
ð
" six times.)
(
) Use the "INC" and "DEC" switches directly below the displayed MIDI
Receive channel to select the MIDI channel that the All Access is to
receive MIDI commands on.