40
MIDI, Page 6 of 7 - Program Mapping
This page allows for incoming program changes to be mapped to All
Access presets when the Program Change Status is set to "MAP"
(see MIDI,
Page5)
. This feature is only available when operating the All Access in Bank
Mode.
To assign the program mapping status:
(
) With the 2ND L.E.D. still lit, press the "
ð
" switch to access the next page
of the MIDI program,
Program Mapping
. (If the All Access is not already
in the MIDI editing mode, press "2ND", then "MIDI", followed by "
ð
" five
times.)
(
) Use the "INC" and "DEC" switches directly below the displayed Program
Change number to select the desired Program Change number to be
mapped to an All Access preset.
(
) Use the "INC" and "DEC" switches directly below the displayed preset
number to select the All Access preset that the displayed program change
number will be mapped to.
