AC voltage measurement
• put the black sampler in the slot
• put the red probe in the socket
• turn the main switch to position
• put the probes to the place of measurement,
the voltage value will appear on the display.
• after taking measurements, disconnect
the testers from the circuit
V.F.C variable frequency voltage measurement
• put the black sampler in the slot
• put the red probe in the socket
• turn the main switch to position
and press the SEL / VFC button for 2 seconds
to turn on the V.F.C function
• put the probes to the place of measurement,
the voltage value will appear on the display.
• after taking measurements, disconnect the
testers from the circuit
µ
A, mA, A DC current measurement
• put the black sampler in the slot
• put the red probe in the socket
• turn the main switch to position
µ
A / mA / A
• put the probes to the place of measurement,
the display will show the value of the intensity
and its polarity
• current measurement up to 10A must not last
longer than 10 seconds, because it may overheat
and blow the fuse
• parallel measurements of two different circuits
must not be performed using testers connected
to the ports in one multimeter, as this may
blow the fuse
• after taking measurements, disconnect
the testers from the circuit
