11
10
Shield assemb
Tighten the disc with a wrench
ATTENTION.
The nut (1) can be fitted with
the smaller diameter upwards
(on flat discs) or downwards
(on thicker and concave
discs.) Before turning the
grinder on, make sure that
the mounting is correct.
Make sure the blade washer
(3 and 4) fits perfectly into
the blade bore and is seated
properly against the spindle.
If there is play or the disc is
not fitted properly. Be sure
to fix the disc.
1
1
2
3
4
1
2
3
4
1
2
1
2
4
3
Press down and hold
the spindle lock
Install the grinding
disc and the smaller
diameter nut down
Install the cutting
disc and nut with the
smaller diameter up
Attaching the handle and blade guard
Inclusion
Press the main switch to position 1 to start the device.
Lock the switch to work freely and safely with both hands.
To turn it off, press and slide the switch to position 0.
1
2
3
1
2
3
4
1
