Rockpals R2000i, Owner'S Manual

Page: 6 / 45

6
CONNECTION TO A HOUSE
POWER SUPPLY
WARNING : If this generator is
used as a supply for a building’s wiring
system as a standby, the generator must
be installed by a qualifie d electrician and
connected to a transfer switch as a
separately derived system in accordance
with the Na�onal Electrical Cod e, NFPA
70. The generator shall be connected to
a transfer switch that switches all
conductors excluding the equipment
grounding conductor. The frame of the
generator shall be connected to an
approved grounding electrode. Any
improper connec�on may cause damage
to the generator, or cause a fire.
Fig.8
Fig.9
Fig.10
GENERATOR GROUND
CIRCUIT
In order to prevent electric shock due to
shoddy electrical appliances or wrong
use of electricity, the generator must be
grounded with a good-quality insulated
Conductor.
Fig.11
CAUTION:
Make sure the control panel, louver and
the inverter bo�om side cooli ng well and
without chips, mud and water come in. it
may damage the engine, inverter or
alternator if the cooling vent blocked.
Do not mix
the generator with other stuff
If moving, storing or running the unit.
It may cause the generator damage or
property safety issue when the generator
in leakage.